Document Type : Research Paper
Authors
Abstract
Recovering, recycling, and remanufacturing end-of-life products (disassembly line) are appropriate methods of reducing the environmental impact associated with wastes. A disassembly line is a viable option for doing so. The objective of the disassembly line balancing problem (DLBP) is to coordinate disassembly line activities so that total operating times of workstations are nearly equal. The disassembly process mainly aims to reuse components in end-of-life products and thus reduce adverse environmental effects. This paper employs an approach based on the Kano model, Fuzzy AHP, M-TOPSIS, and PROMETHEE. Furthermore, using AND/OR precedence relationships, the optimal sequence of disassembly is obtained. Tasks are assigned to workstations according to priority and precedence relationships. An illustrative example of the proposed method is solved using both M-TOPSIS and PROMETHEE. Both methods lead to a decrease of two seconds in total cycle time. Despite yielding equal results, PROMETHEE is superior to M-TOPSIS in terms of complexity and ease of use. However, it takes longer to complete.
Keywords
. راد، ع؛ منصور، س؛XU ، Y وفاطمی، م.(1392) بازیابی تجهیزات الکتریکی و الکترونیکی بر اساس ابعاد محیط زیستی، اقتصادی و اجتماعی توسعه پایدار. تهران، کنفرانس انژری و محیط زیست
Agrawal S., Tiwari M.K. (2008). A Collaborative Ant Colony Algorithm to Stochastic Mixed-model U-shaped Disassembly Line Balancing and Sequencing Problem. International Journal of Production Research, 46(6), 1405–1429.
Altekin F.T., Akkan C. (2011). Task-failure-driven rebalancing of disassembly lines. International Journal of Production Research, 46(10), 1-22
Altekin F.T., Kandiller L., Ozdemirel N.E. (2008). Profit-oriented disassembly-line balancing. International Journal of Production Research, 46(10), 2675–2693.
Athawale V.M., Chakraborty S. (2010). Facility Location Selection using PROMETHEE II Method. In Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, Dhaka, Bangladesh, 78-98.
Avikal S., Mishra P. K., Jain R. (2013). An AHP and PROMETHEE methods based environ-ment friendly heuristic for disassembly line balancing problems. interdisciplinary environmental review, 14(1), 69–85.
Avikal S., Mishra P.K., Jain R. (2014). An fuzzy AHP and PROMETHEE methods basedheuristic for disassembly line balancing problems. International Journal of Production Research, 152(5), 1306–1317.
Bentaha M.L., Battaïa O., Dolgui A. (2014). A Sample Average Approximation Method for Disassembly Line Balancing Problem under Uncertainty. Computers and Operations Research, 51(1), 111–122.
Bentaha M.L., Battaïa O., Dolgui A. (2014). Disassembly Line Balancing and Sequencing under Uncertainty. Procedia CIRP 15, 239–244.
Bentaha M.L., Battaïa O., Dolgui, A. (2014). Lagrangian Relaxation for Stochastic Disassembly Line Balancing Problem. Procedia CIRP 17, 56–60.
Berger C., Blauth R., Boger D., Bolster C., Burchill G., DuMouchel W., Pouliot F., Richter R., Rubinoff A., Shen A., Timko M., Walden D. (1993). Kano’s methods for understanding customer-defined quality, central quality management jornal. 2 (4), 2–36.
Brucker K. De, Verbeke A., Macharis C. (2004). The applicability of multi-criteria analysis to the evaluation of intelligent transport systems (ITS), research in transportation economics 8, 151–179.
Buckley J.J. (1985). Fuzzy Hierarchical Analysis, Fuzzy Set and Systems. 17, 233–247.
Chaudha A., Jain R., Singh A.R., Mishra P.K. (2011). Integration of Kano’s model into quality function deployment (QFD), International Journal of Advanced Manufacturing Technology, 53, 689–698.
De Brucker K., Verbeke A., Macharis C. (2004). The applicability of multicriteria-analysis to the evaluation of intelligent transport systems (ITS). Research in transportation economics 8(1), 151–179.
Ding L.P., Feng Y.X., Tan J.R., Gao Y.C. (2010). A new multi-objective ant colony algorithm for solving the disassembly line balancing problems, Internati
Ding L.P., Feng Y.X., Tan J.R., Gao Y.C. (2010). A New Multi-objective Ant Colony Algorithm for Solving the Disassembly Line Balancing Problems. International Journal of Advanced Manufacturing Technology, 48(1), 761–771.
Doumpos M., Zopounidis C. (2004). A Multi-criteria Classification Approach Based on Pair-wise Comparison. European Journal of Operational Research, 158(1), 378–389.
Gungor A., Gupta S.M. (1999). Issues in environmentally conscious manufacturing and product recovery: a survey. Computers and Industrial Engineering, 36(4), 811-853.
Gungor A., Gupta S.M. (2002). Disassembly line in product recovery. International Journal of Production Research, 40(11), 2569-258
Gungor. A., Gupta, S.M. (2001). A solution approach to the disassembly line problem in the presence of task failure. International Journal of Production Research, 39(7), 1427-1467.
Gupta S.M., Lambert A.J.D. (2008). Methods for optimum and near optimum disassembly sequencing, International Journal of Production Research, 46 (11) 2845–2865.
Gupta S.M., Taleb K.N. (1996). An algorithm to disassemble multiple product structures with multiple occurrence of parts. Proceedings of the International Seminar on Reuse, (pp. 153-162). Eindhoven The Netherlands.
Hajkowicz S., Higgins A. (2008). A Comparison of Multiple Criteria Analysis Techniques for Water Resource Management. European Journal of Operational Research, 184(1), 255–265.
Homem de Mello, L.S., Sanderson A.C. (1990). And/or graph representation of assembly plans, IEEE transactions on robotics and automation. 6, 188–199.
Ilgin M.A., Gupta S.M. (2010). Comparison of economic benefits of sensor embedded products and conventional products in a multi-product disassembly line, Computers and Industrial Engineering, 59 (2010) 748–763.
Ilgin M.A., Gupta, S.M. (2010). Comparison of economic benefits of sensor embedded products and conventional products in a multi-product disassembly line, Computers and Industrial Engineering, 59, 748–763.
Kalayc C.B., Gupta S.M. (2011). A hybrid genetic algorithm approach for disassembly line balancing. Proceedings of the 42nd Annual Meeting of Decision Science Institute , Boston, MA, US, 100-111.
Kalayc C.B., Gupta S.M. (2011). A simulated annealing algorithm for balancing a disassembly line. Proceedings of the Seventh International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Kyoto, Japan, 70-89.
Kalayc, C.B., Gupta, S.M. (2011). Tabu search for disassembly line balancing with multiple objectives. 41st International Conference on Computers & Industrial Engineering (CIE41), University of Southern California, Los Angeles, CA, 70-80.
Kano N., Seraku K., Takahashi K., Tshuji S. (1984). Attractive quality and must be quality. japan society for quality control, 14(2), 39–48.
Koc A., Sabuncuoglu I., Erel E. (2009). Two Exact Formulations for Disassembly Line Balancing Problems with Task Precedence Diagram Construction Using an AND/OR Graph. IIE Transactions on Operation Engineering, 39(1), 866–881.
Lambert A.D. (1999). Linear programming in disassembly/clustering sequence generation. Computers and Industrial Engineering, 36(1), 723–738.
Lambert J. D. (2003). Disassembly sequencing: a survey. International Journal of Production Research, 41(1), 3721–3759.
Macharis C., Verbeke A., De Brucker K. (2004). The Strategic Evaluation of New Technologies through Multicriteria Analysis: The Advisors Case . Research in Transportation Economics, 443–462.
Martin L., Lars W. (2008). Two decades of using Kano’s theory of attractive quality: aliterature review. Quality management jornal, 15(1), 59–78.
Matzler K., Hinterhuber H.H. (1998). How to make product development projects more successful by integrating Kano’s model of the customer satisfaction into quality function deployment. Technovation, 18(1), 25–38.
McGovern S. M, Gupta S.M. (2003). 2-opt Heuristic for the Disassembly Line Balancing Problem. Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, (pp. 71–84). Providence, Rhode Island.
McGovern S.M., Gupta S.M. (2006). Ant Colony Optimization for Disassembly Sequencing with Multiple Objectives. International Journal of Advanced Manufacturing Technology, 8(1), 481–496.
McGovern S.M., Gupta S.M. (2007). Combinatorial Optimization Analysis of the Unary NP-complete Disassembly Line Balancing Problem. International Journal of Production Research, 45(18-19), 4485–4511.
Paksoy T., Güngör A., Özceylan E., Hancilar A. (2013). Mixed Model Disassembly Line Balancing Problem with Fuzzy Goals. International Journal of Production Research, 51(20), 6082–6096.
Ranky R.J., Subramanyam M., Caudill R.J., Limaye K., Alli N. (2003). Dynamic scheduling and line balancing methods, and software tools for lean and reconfigurable disassembly cells and lines, in: Proceedings of the IEEE International Symposium on Electronics and Environment, Boston, MA, 234–239.
Ren L., Zhang Y., Wang Y., Sun Z. (2007). Comparative analysis of a novel M-TOPSIS method and TOPSIS, applied mathematics research express, Article ID abm005, 10 pages.
Saaty T.L. (1980). Analytic Hierarchy Process. New York: McGraw-Hill.
Singh A.R., Mishra P.K., Rajeev Jain M.K. (2002). Robust strategies for mitigating operational and disruption risks: a fuzzy AHP approach. international jornal multi criteria decision, 2(1), 1–28.
Tan K.C., Shen X.X., Integrating Kano’s model in the planning matrix of Quality Function Deployment, Total Quality Management. 11 (8) (2000) 1141–115.
Tang Y., Zhou M.C. (2006) . A systematic approach to design and operation of disassembly lines, IEEE transactions on automation science and engineering 3 (3) 324–329.
Tiwari M.K., Sinha N., Kumar S., Rai R., Mukhopadhyay S.K. (2001). A Petri Net based approach to determine strategy of a product, International Journal of Production Research, 40 (5) 1113–1129.Journal of Advanced Manufacturing Technology, 48, 761–771.
Torfi F., Farahani R.Z., Rezapour S. (2010). Fuzzy AHP to determine the relative weightsof evaluation criteria and fuzzy TOPSIS to rank the alternatives. Applied Soft Computing, 10(1), 520–528.
Turcksin L., Bernardini A., Macharis C. (2011). A Combined AHP-PROMETHEE Approach for Selecting the Most Appropriate Policy Scenario to Stimulate a Clean Vehicle Flee. Procardia Social and Behavioral Sciences, 954–965.
Yadav H.C., Jain R., Singh A.R., Mishra P.K. (2012). Robust design approach with fuzzy-AHP for product design to enhance aesthetic quality. international journal design engineering, 5(1), 65–90.
)