نوع مقاله : مقاله پژوهشی

نویسندگان

1 استادیار گروه مدیریت دانشگاه فردوسی مشهد

2 دانشجوی دکتری مدیریت تحقیق در عملیات دانشگاه فردوسی مشهد

چکیده

بسیاری از شرکتها هنگام استفاده از ابزارها و شیوههای دستیابی به اهداف تولید ناب، به علت عددم وجدود
یک نگرش واحد از ابزارهای پیادهسازی و ارزیابی بدا مشدلاتت عدیدده ای مواجده شدده اندد بده ردوری کده
محققان مختلف با توجه دیدگاههای خود روشهای مختلفی را به منظور استقرار و ارزیابی تولید ناب در صنایع
پیشنهاد دادهاند. بر همین اساس نیز هدف این تحقیق ارائه مدلی جهت ارزیابی تولید ناب در صدنایع کوکدک و
متوسط با استفاده از ترکیب روشهای تحلیل عاملی تأییدی، خوشهبندی و تلانیک PROMOTEE میباشد.
جامعه آماری این تحقیق شامل کلیه شرکتهای صنایع کوکک و متوسط تولیدکننده فلزات اساسی و فابریلای
استان آذربایجانشرقی بوده است. به منظور جمعآوری دادهها در این تحقیق از پرسشنامه محقق سداخته اسدتفاده
گردیده که پس از ارمینان از روایی و پایایی در بین نمونه آماری تحقیق توزیدع شدده اسدت. یافتده هدای تحلیدل
عاملی تأییدی نشان دهنده وجود هشت سازه اصلی به عنوان شیوهها و ابزارهای اصدلی تولیدد نداب بدوده اسدت.
تحلیل خوشهای انجام گرفته به روش k میانگین نیز، تولیدکنندگان نمونه آمداری را در سده خوشده دسدته بنددی
نمود. در نهایت رتبهبندی انجام گرفته نشان داد که خوشه دوم، سوم و اول به ترتیب در رتبههای اول تا سد وم از
منظر عمللارد آنها در تولید ناب قرار گرفتند. نتایج تحقیق نشان میدهد که صنایعی که توجه بیشتری به تولید به
موقع، تأمینکنندگان و مشتریان دارند، عمللارد بالاتری نیز در تولید ناب دارند

کلیدواژه‌ها

عنوان مقاله [English]

Investigating the Effect of Firm Size and Industry Growth Rate on Survival of Newcomer Companies in Electronic and Electric Industries of Mazandaran Province

نویسندگان [English]

  • Alireza Pooya 1
  • Golamreza Soltani-fesaghandis 2

چکیده [English]

Newcomer companies, creating dynamism in the economy, as through the provision of goods, services and new technologies, increasing competition in the market and expanding the industry, making it more dynamic. But the fact that what was going on after their entrance are also important. Because their growth and longevity in achieving long- term goals and policies in regarding employment and economic growth are of particular importance. This study was conducted to investigate the factors that influence the survival of newcomer companies. Company size and growth rate of the industry are features that are assumed to affect the survival of the company. So the effects of these variables on the survival of newcomer companies of Electronic and Electric Industries in Mazandaran province during1981-2011 were studied.
Semi-parametric Cox regression model was used to test the hypotheses. In order to further analyze the data, nonparametric model life table and product limit estimator was used. Data from the Mazandaran province database of Industry, Mine and Trade were collected and for data processing, winTDA software is used. As a result of this study, a positive relationship between firm size and survival rates were approved. But there was no significant relationship between industry growth rates and survival

کلیدواژه‌ها [English]

  • Newcomer Companies
  • Firm size
  • Industry Growth Rate
  • Survival Analysis
منابع
پویا، علیرضا) 0749 (، سیستمهای تولیدی در ایران و عمللارد کسب و کار آنها، مددیریت تولیدد و
- .34 عملیات، دوره سوم، شماره یک، صص 099
پویا، علیرضا استمی، قاسم و حسنیه رباربایی) 0740 (، نودشناسی علل پافشاری بر تصدمیمات در
- . بخش دولتی، بهبود مدیریت، سال ششم، شماره یک، صص 70 55
جعفرنژاد، احمد احمدی، احمد و محمد حسن مللای) 0749 (، ارزیدابی تولیدد نداب بدا اسدتفاده از
رویلادرد ترکیبدی از تلانیدکهدای ANP و DEMATEL در شدرایط فدازی، مطالعدات مددیریت
- . صنعتی، سال هشتم، شماره 29 ، صص 0 25
شفیعی رودپشتی، میثم و سید حبیباله میرافوری) 0749 (، ارزیابی تولید نداب بدا رویلادرد سلسدله
- . مراتبی، مطالعات مدیریت صنعتی، سال نهم، شماره 22 ، صص 94 39
متقی، هایده) 071۶ (، مدیریت تولید و عملیات، کاپ کهام، تهران: انتشارات آوای پاتریس.
Abdulmalek, F.A. & Rajgopal, J. (2007). Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study, Int. J. Production Economics, 107: 223–236
Allway, M., & Corbett, S. (2002). Shifting to lean service: stealing a page from manufacturers’ playbooks. Journal of Organizational Excellence, 21(2): 45–54.
Atkinson P. (2010). Lean is a cultural issue. Management Services, 54:35–44.
Azevedo, S.G., Govindan, K., Carvalho, H., & Cruz-Machado, V. (2012). An integrated model to assess the leanness and agility of the automotive industry, Resources, Conservation and Recycling, 66: 85– 94.
Bayou, M.E. & de Korvin, A. (2008). Measuring the leanness of manufacturing systems- A case study of Ford Motor Company and General Motors, J. Eng. Technol. Manage. 25: 287–304.
Bentler, P.M. & Chou, C.(1987), Practical issues in structural equation modeling, Sociological Methods and Research, Vol. 16, pp. 78-117.
Bhasin, S. (2012). Performance of Lean in large organizations, Journal of Manufacturing Systems 31: 349– 357.
Bhasin, S., & Burcher, P., (2006). Lean viewed as a philosophy. Journal of Manufacturing Technology Management 17 (1), 56-72.
Biazzo, S., & Panizzolo, R., (2000). The assessment of work organization in lean production: the relevance of the worker’s perspective. Integrated Manufacturing Systems 11 (1), 6-15.
Bicheno J, & Holweg M. (2009). The Lean toolbox. Buckingham: Picsie.
Brans JP, Vincke Ph, Mareschal B., (1986). How to select and how to rank projects: The PROMETHEE method. European Journal of Operational Research, 24, 228–238.
Brans, J.P. & Mareschal, B., (2005). PROMETHEE methods, in Figueira, J., Greco, S. and Ehrgott, M. (Eds)., Multiple Criteria Decision Analysis: State of the Art Surveys, Springer, New York.
Chiappetta Jabbour, C.J., Lopez de Sousa Jabbour, A.B., Govindan,K., Teixeira, A.A., & de Souza Freitas, W.R. (2012), Environmental management and operational performance in automotive companies in Brazil: the role of human resource management and lean manufacturing, Journal of Cleaner Production xxx, 1-12.
de Treville, S. & Antonakis, J., (2006). Could lean production job design be intrinsically motivating? Contextual, configurationally, and levels-of-analysis issues. Journal of Operations Management 24 (2), 99–123.
Deif, A. (2012). Assessing Lean Systems Using Variability Mapping, Procedia CIRP 3: 2 – 7
Demeter K. & Matyusz Z. (2011). The impact of Lean practices on inventory turnover. International Journal of Production Economics, 133(1):154–63.
Ding, L., Velicer, W.F. & Harlow, L.L.(1995), Effects of estimation methods, number of indicators per factors and improper solutions on structural equation modeling fir indices, Structural Equation Modeling, A Multidisciplinary Journal, Vol. 2, pp.119-143.
Doolen, T.L., & Hacker, M. E., (2005), A Review of Lean Assessment in Organizations: An Exploratory Study of Lean Practices by Electronics Manufacturers, Journal of Manufacturing Systems, 24(1), 55-67.
Goldsby, T. & Martichenko, R., (2004). Lean Six Sigma Logistics. J. Ross Publishing, Boca Raton, FL.
Hines, P., Holweg, M. & Rich, N., (2004). Learning to evolve: a review of contemporary lean thinking. International Journal of Operations and Production Management 24 (10), 994–1011.
Holweg, M. (2007). The genealogy of lean production, Journal of Operations Management, 25: 420- 437.
Hopp, W.J. & Spearman, M.L., (2004). To pull or not to pull: what is the question? Manufacturing and Service Operations Management 6 (2), 133–148.
Jordan, J.A., Jr. & Michel, EJ. (2001). The Lean Company: Making the Right Choices. Dearborn, MI: Society of Manufacturing Engineers.
Lee C, Kwon I-W, & Severance D. (2007). Relationship between supply chain performance and degree of linkage among supplier, internal integration, and customer. Supply Chain Management: An International Journal, 12(6):444–52.
Li, S., Subba Rao, S., Ragu-Nathan, T.S. & Ragu-Nathan, B., (2005). Development and validation of a measurement instrument for studying supply chain management practices. Journal of Operations Management 23 (6), 618–641.
Lohlin, J.C.(1992), Latent variables Models: An introduction to factor, path and structural analysis(2nd ed.), Mahwah, NJ: Lawrence Erlbaum associated, Inc.
Losonci, D., Demeter,K. & Jenei, I. (2011). Factors influencing employee perceptions in lean transformations, Int. J. Production Economics, 131:30–43.
MacDuffie, J.P.; Sethuraman, K. & Fisher, M.L. (1996). Product variety and manufacturing performance: Evidence from the international automotive assembly plant study. Mgmt. Science, 42: 350-369.
Matsui, Y., (2007). An empirical analysis of just-in-time production in Japanese manufacturing companies. International Journal of Production Economics 108 (1–2), 153–164.
McLachlin, R., (1997). Management initiatives and just-in-time manufacturing. Journal of Operations Management 15 (4), 271–292.
Meier, H.S. & Forrester, P.L. (2002). A Model for Evaluating the Degree of Leanness of Manufacturing Firms. Integrated Manufacturing Systems, 13(2), 104-109.
Narasimhan, R., Swink, M. & Kim, S.W. (2006). Disentangling leanness and agility: An empirical investigation, Journal of Operations Management, 24: 440–457.
Nightingale, D.J. & Mize, J.H. (2002). Development of a lean enterprise transformation maturity model. ln/ommtion, Knowledge, Systems Mgmt, 3: 15-30.
Panizzolo R. (1998). Applying the lessons learned from 27 lean manufacturers. The relevance of relationship management." lnt'l Journal of Production Economics, 55: 223-240.
Parveen M. & Rao T. (2009). An integrated approach to design and analysis of Lean manufacturing system: a perspective of Lean supply chain. International Journal of Services and Operations Management, 5(2):175–208.
Perez, M.P. & Sanchez, A.M. (2000). Lean production and supplier relations: A survey of practices in the Aragonese automotive industry. Technovation, 20: 665-676.
Pettersen, J., (2009). Defining lean production: some conceptual and practical issues. The TQM Journal 21 (2), 127-142.
Sanchez, A. M., & Perez, M. (2001). Lean indicators and manufacturing strategies. International Journal of Operations & Production Management, 21(11).
Seyedhosseini, S.M., EbrahimiTaleghani, A., Bakhsha, A. & Partovi, S. (2011), Extracting leanness criteria by employing the concept of Balanced Scorecard, Expert Systems with Applications, 38: 10454–10461
Shah, R. & Ward, P.T. (2003). Lean manufacturing: Context, practice bundles, and performance. Journal of Operations Management, 21: 129-149.
Shah, R. & Ward, P.T. (2007). Defining and developing measures of lean production, Journal of Operations Management, 25: 785–805
Simons, D. & Zokaei, K. (2005). Application of Lean Paradigm in Red Meat Processing., British Food Journal, 107(4): 192-211.
Simpson, D.F., & Power, D.J., (2005). Use the supply relationship to develop lean and green suppliers. Supply Chain Management: An International Journal, 10 (1), 60–68.
Womack, J. P. (2006). How do we know how lean we are? Lean Enterprise Institute (LEI), Eletter
Womack, J. P., & Jones, D. T. (2003). Lean thinking; Banish waste and create wealth in your corporation. Simon & Schuster UK Ltd.
Yang, M., Hong, P. & Modi, S.B. (2011). Impact of lean manufacturing and environmental management on business performance: An empirical study of manufacturing firms, Int. J. Production Economics, 129: 251–261
Yurdakul, M. (2002). Measuring the manufacturing system’s performance using Saaty’s with feedback approach. Integrated Manufacturing Systems, 13(1